Idek Iiyama Vision Master 17 (MF-8617) Reference

This is a fairly popular monitor for use with the Amiga, since it is a high quality, relatively inexpensive 17-inch monitor that can sync down to about 23.5 kHz, and therefore works with most (all?) AGA "double" screenmodes. All presets and controls are digital, set through three front-panel buttons and an LCD display. The image can easily be expanded to fill the screen in all modes. (See Boards/A2320 'Amber' Reference for information on the A2320 'Amber' board that may be used with this monitor.)


    Sync Frequency: 23.5 kHz to 86.0 kHz Horizontal
                    50 Hz to 120 Hz Vertical

        Resolution: Maximum 1280 x 1024 at 80 Hz

  Input Connectors: Five BNC connectors and one DB15 (not high density)
                    (A cable is included to connect a HDD15 VGA-type
                    connector to the DB15 connector on the monitor.)



   Pin 1: Red
   Pin 2: Red Ground
   Pin 3: Green
   Pin 4: Green Ground
   Pin 5: Blue
   Pin 6: Blue Ground
   Pin 7: Ground
   Pin 8: NC
   Pin 9: NC
  Pin 10: NC
  Pin 11: NC
  Pin 12: NC
  Pin 13: NC
  Pin 14: Horizontal or HV Sync
  Pin 15: Vertical Sync